2.0 inch QVGA (320×240) TFT LCD

Video Streaming
HLS | 432×240 @ 30fps

IEEE 802.11b/g/n
Bandwidth : 2.4GHz
Distance: 20m ~ 70m(Max)

Built-in PCB antenna

Power and Battery
3 hours of continuous video streaming
Built-in Rechargeable Li-polymer Battery 1,050mA

Micro USB (Charging & F/W update)

Weight and Dimensions
Height: 2.08 inches (52.9 mm)
Width: 2.78 inches (70.6 mm)
Depth: 0.74 inch (18.8 mm)
Weight: 2.3 ounces (66 grams) (without wristband)

Available Camera



R1+ Manual


What is the difference between R1 and R1+?

R1+ is waterproof up to 1M and the R1 is rainproof. The R1+ also has additional firmware features that the R1 does not have, for example, on the R1+, you can set the GoPro SSID and password.

What is the different between R1/R1+ and the P1?

The R1/R1+ has a built in LCD screen. The P1 uses the GoPro LCD BacPac, which is sold separately.

Can the R1/R1+ be used while charging?

Yes, you can use the R1/R1+ while it is being charged from an external power source.

Why doesn’t the R1/R1+ live stream while recording for some of the resolutions and frame rates?

Live streaming is controlled by the GoPro camera. GoPro does not support live streaming while recording for some of the high resolutions/frame rates, for example, 4K at 30FPS. The R1/R1+ support all live streaming that the GoPro camera supports and the R1/R1+ firmware will be updated if the GoPro camera starts to support new resolutions/frame rates.

Why isn’t there a firmware update for the R1+?

If your device is not recognized by computer, try using different USB cable, or connect to different USB port. If firmware is not updated even though files are copied, make sure follow the instruction in this page https://removu.com/firmware-mac/firmware-r1p/

Can I use the R1+ with GoPro Hero 5 Session and/or Hero 7?

Unfortunately the GoPro Hero 5 Session and Hero 7 are not compatible with the R1+. Even if some user managed to connect to it, however it is very unstable/unusable due to hardware incompatibility.

What files do I copy to the R1 when updating the firmware?

Only copy the BIN and/or IMG file(s) directly to the R1/R1+. Make sure any of these files are not located inside a folder.

I used may Mac computer and downloaded firmware file. But I couldn’t find .bin file.

If you are using Safari, the browser further extracts .bin file. Please try using Google Chrome to avoid further extraction of .bin file after downloading.

I downloaded firmware version 1.2.1 for the R1+. However, the file I downloaded is r1_121.bin.

Some browsers automatically change the file name to r1_121.bin. In such case, please manually change the file name as r1+_121.bin before uploading to your R1+

My R1+ has firmware version 1.0.5. Why can’t I update it to version 1.2.1?

If your original firmware is version 1.0.5, you must update it version 1.1.0 before updating it to version 1.2.1.

Why I can't connect the R1+ to GoPro Hero 6 and/or Hero (2018)?

Please check to see if the GoPro's Wi-Fi settings is set to 2.4 GHz. If you're on 5.0 GHz, please change it to 2.4 GHz. If the issue persists, please contact support.

Why can't I change the settings for GoPro Hero 5 or 6?

Due to GoPro's limitations for the Wi-Fi. The R1+ cannot change settings for Hero 5 and 6. At this moment the R1+ can only perform basic functions for Hero 5 and 6.

Is there any plans supporting GoPro Hero 7?

Unfortunately GoPro has discontinued supports for 3rd party connections. We do not have any plans for the GoPro Hero 7 with the R1/R1+.



REMOVU R1+ for GoPro

R1+ Skydiving with Brad Pilecki


REMOVU R1+ How to connect to HERO6